iShot® Sony FCB-EV7520 w/ Interface Board OEM Evaluation Kit

SKU: EM15216

• 1/2.8" Exmor CMOS image sensor
• Full HD
• 30× optical zoom
• F1.6 aperture
• Up to 1080p60 resolution output
• Automatic camera detection
• Video format selection by DIP switches
• TTL or RS232 VISCA level serial control interface
• Supply voltage 6V to 9VDC **
• Auxiliary power output 5VDC, 1 A
• Size 48mm x 45mm x 17mm

Details

iShot® Sony FCB-EV7520 w/ Interface Board OEM Evaluation Kit

The Sony FCB-EV7520 HD low light block camera uses a 1/2.8" Exmor CMOS image sensor (approx. 2.14 million effective pixels) that supports FULL HD (high definition) to produce high-quality images. Using progressive scan, images with a wide dynamic range can be obtained with the newly developed image signal processor (Wide Dynamic Range mode).

The Sony FCB-EV7520 low light block camera is equipped with a bright zoom lens with 30× optical zoom and F1.6 aperture (optical zoom + digital zoom = 360×).

Low-noise images can be obtained even in low-light environments using the Noise Reduction function.

The Sony FCB-EV7520 low light block camera's video signals can be output as digital and analog Y/Pb/Pr outputs. Depending on register settings, you can select from a variety of digital output methods: 1080p/59.94, 1080p/50, 1080p/29.97, 1080p/25, 1080i/59.94, 1080i/50, 720p/59.94, 720p/50, 720p/29.97, 720p/25.

An infrared (IR) Cut-Filter can be disengaged from the image path for increased sensitivity in low light environments. The ICR will automatically engage depending on the ambient light, allowing the Sony FCB-EV7520 low light camera to be effective in day/night environment.

VISCA is a communications protocol, which enables the FCB-EV7520 to be controlled remotely from a host computer/controller. VISCA is trademark of Sony Corporation.

Six memory locations are provided to temporally save and recall up to sixteen sets of camera settings.

A Privacy Zone Masking function (max. 24 blocks) is available.

A Motion Detection (MD) function is available.

A title composed of up to 11 lines can be set for displaying on the screen. 20 characters can be used on one line.

Adjustable AE response speed.

 

HDMI Interface Board

HDMI digital and analog HD video output*

  • Up to 1080p60 resolution output
  • Automatic camera detection
  • Video format selection by DIP switches
  • TTL or RS232 VISCA level serial control interface
  • Supply voltage 6V to 9VDC **
  • Auxiliary power output 5VDC, 1 A
  • Size 48mm x 45mm x 17mm

Low power consumption
The board has been designed by using components that require low energy consumption. The intensity that circulates in components is reduced. This also reduces the radiated emission for EMC regulation. It confers an electromagnetic behavior suitable with the hardest medical and aeronautical standards.

Key switch local control
Connecting the camera to a computer to drive it is not a requirement. DIP switches available on the board will allow you to select the desired camera video format.

You can also control the main VISCA functions such as zoom, freeze, factory preset that are preprogrammed by connecting a push-buttons keyboard on the board. It is possible to modify this configuration to replace it by your own OEM functions.

Tailor-made image processing functions
The HDMI interface board is based on a powerful Xilinx FPGA. Graphic overlay and image processing functions can be implemented to the image flow in real time.

 

* Refer to camera technical manual for video standard supported
**Refer to camera technical manual for max power supply input

 

InterTest, Inc. is an Authorized National Systems Integrator for Sony’s Visual Imaging Products division.

Specifications

Image Device

1/2.8-type CMOS

Effective Pixels

Approx. 2.13 Megapixels

Digital Zoom

12x (360x with optical zoom)

Horizontal Viewing Angle

63.7°(wide end) to 2.3°(tele end)

Minimum Object Distance

10 mm (wide end) to 1200 mm (tele end) (Default: 300 mm)

Sync System

Internal

Electronic Shutter

1/1 s to 1/10,000 s, 22 steps

White Balance

Auto, ATW, Indoor, Outdoor, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), One-push, Manual

Gain

Auto/Manual 0 dB to 50.0dB (0 to 28 steps +2 step/ total 15 steps); Max. Gain Limit 10.7 dB to 50.0 dB (6 to 28 steps +2 step/total 12 steps)

Wide Dynamic Range

No

Backlight Compensation

Yes

Privacy Zone Masking

Yes

Character Generator

20 characters/line, max. 11 lines

Focus System

Auto (Sensitivity: normal, low), One-push AF, Manual, Interval AF, Zoom Trigger AF, Focus compensation in ICR on

Picture Effects

E-Flip, Nega Art, Black & White, Mirror image, Color enhancement

Exposure Control

Auto, Manual, Priority mode (shutter priority & iris priority), Bright, EV compensation, Slow AE

Lens Value

30x optical zoom; f=4.3mm (wide) to 129.0mm (tele); F1.6 to F4.7

S/N Ratio

More than 50 dB

Minimum Illumination

Color: 1.4 lx (F1.6, AGC on, 1/30 s); High Sensitivity Mode Color: 0.35 lx (F1.6, AGC on, 1/30 s)

Video Output

Digital: Y/CB/CR 4:2:2 via LVDS (Signal format conforms to SMPTE 274/SMPTE 296.) SD VBS

Camera Control Interface

VISCA (CMOS 5 V level; Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4 Kbps, 115.2 Kbps, Stop bit: 1 bit

Dimensions (W x H x D)

50.0 x 60.0 x 89.7 mm

Weight

Approx. 260 g

Operating Temperature

-5 ℃ to +60 ℃

Storage Temperature

-20 ℃ to +60 ℃

Operating Humidity

20% to 80%

Power Consumption

3.2 W (zoom/focus inactive); 4.0 W (zoom/focus active)

Power Requirements

6.0 V to 12.0 V DC


Downloads

 

Sony FCB-EV7520 Technical Manual

Recently Viewed