iShot® XBlock® Dual Output HD-SDI & NTSC / PAL Interface Board Only

SKU: EM18775

:
Login to see prices

Intertest Cost

Details

iShot® XBlock® Dual Output HD-SDI & NTSC / PAL Interface Board Only

HD-SDI and NTSC / PAL interface board for SONY FCB-EH and EV cameras when set to 1080p30 or 1080p25 HDSDI format.  The composite image corresponds to the central area of the HD image and represents approximately a third of the total image.

This board provides an HD-SDI output and a composite output for SONY FCB HD & 3G block cameras.  The remote configuration of the camera can be made in TTL or in RS232 level.

HD input

  • 5 or 8 channels signal LVDS (Y, Cb, Cr, Sync, Clk) 8 bits (« Channel link » format)

  • LVDS clock: 74,25MHz

  • Video format : 1080p29,97-1080p30-1080p25-1080i59,94-1080i60-1080i50-1080p59,94- 1080p60-1080p50

  • KEL 30 way connector

HD/SDI output

  • SDI 8 bits SMPTE 292M, 800mVcc, 75ohm

  • HD = 1,485 Gbit/s or 3G = 2,97Gbit/s

  • Format: identical to the camera

  • SMB connector or MCX 75 ohm

Composite output
  • 1V ptp, 75ohms

  • NTSC format for camera formats 29,97 or 30 or 59,94 or 60, PAL format for camera formats 25 or 50

  • The composite output is synchronous with the input formats 29, 97, 59, 94, 25 and 50. The delay is less than a video line (a few μs).

  • For formats 30 or 60, the NTSC output can’t be synchronous (29,94i/s), offset varies constantly between 0 and 1 image.

  • FFC 9 ways connector

Camera remote control

  • TTL or RS232 level

  • FFC 9 ways connector

Power supply

  • +6 to +12V DC, 6W for FCB-EH6300 camera

  • Polarity inversion protection

  • FFC 9 ways connector

Misc.
  • PCB : 4 layers, class 6, dimensions : 50x50mm

  • Mechanical: 4 holes diam. 2,5mm

Camera connection
  • LVSDS input : 30 ways micro coax KEL ref : USL20-30SS-xxx-C

  • FFC power and communication : 9 ways flex ribbon 1mm

Recently Viewed