Intertest Cost
Details
Twiga USB 3.2 Neo interface board for LVDS zoom block cameras
The interface board converts the native LVDS video signal from zoom bock cameras to USB3 standard, features new visualization, processing and image transfer solutions by using the USB3 streaming possibilities.
Plug & Play LVDS to USB3 solution
A simple USB3 cable is enough to power, to control and to stream HD video from the camera. This enables easy implementation of image capture solutions on most devices with a USB3 port (single board computers, NVidia platforms or PC using Windows or Linux OS).
Uncompressed video stream
Twiga USB3 Neo provides uncompressed UVC compliant video stream. This enables you to use standard application (i.e VLC, Amcap, Windows camera) for image capture, recording & viewing. It also allows to develop custom application and image processing based on DirectShow, GStreamer or OpenCV.
Add-on connector for extended functions
A board-to-board connector available on the back side of the USB3 module will allow you to plug-in additional boards to get more capabilities (i.e 4K camera compatibility), to implement your own functions (i.e Sync information, strobe pulse, external trigger, accelerometer).
Specifications
Digital video output |
USB3.2 Gen 1 – UVC compliant |
Connector |
USB3 micro B-type |
GPIO |
Camera Commands |
Video Format |
Up to 2160p 29.97 |
Video Format Configuraiton |
DIP switches |
Camera Communications |
VISCA protocol via USB CDC or UART TTL |
Power supply |
USB3 cable or external 6 to 12 VDC |
Operation Temp |
- 0°C to 60°C |
Storage temperature range |
-20°C to 60°C |
Regulation |
CE EMC compliant, PCB : UL 94 V0 |
Dimensions(mm) |
48 (H) x 45 (W) x 11 (D) |
Downloads