Description
Details
The XtendaCam® HD AIR 30x Zoom is a wireless camera system designed to view, illuminate, and record inaccessible areas in minutes. Weighing less than 10 lbs total, the XtendaCam® HD AIR can be quickly set up and extended to 23.5 feet on anti-spin, carbon fiber telescoping poles. It uses commercially available, rechargeable 12V batteries that give the system 2 hours of operational time.
The XtendaCam® HD AIR has a powerful 1/2.8” Exmor HD CMOS image sensor, 1080p/30 resolution, 30x motorized zoom lens, motorized tilting, image stabilization, and integrated LED illumination, making it the ideal remote visual inspection (RVI) tool for transportation structures, building structures, snubbers, power generation facility inspection, and law enforcement/military operations.
Quick, single-inspector operation
On average, it takes 4 people an entire shift to construct the scaffolding necessary for structural inspections. Save time and money by skipping scaffolding setup entirely with the XtendaCam® HD AIR. In 10 minutes, an operator can identify and record an area of interest. A foot gimble at the base of the telescoping poles gives the system extra stabilization, while a robust joystick for camera zoom and tilt control provides an easy and efficient user experience.
Wireless Camera Head
The XtendaCam® HD AIR's electronic interface creates a WiFi access point, allowing operators to connect from an iOS/Android tablet or phone. Wirelessly view, record, and control the camera head from any touchscreen interface allowing for quick inspections and fast inspection videos and image uploading or sharing.
Safer workplace
Lower workplace incidents and keep your workforce safer with the XtendaCam® HD AIR. No longer must your personnel climb scaffolding or ladders to make important structural assessments. Critical inspections can be done right from the ground out of harm's way.
Specifications
| Tilt Range | +90 °to -45° |
| Pole Extension Range | 6.5 feet to 23.5 feet |
| Pole Material | Carbon Fiber |
| Weight | <10 lbs |
| User Interface | iOS / Android |
| Wireless Video Output | 12Mbps, H.264 (WiFi) |
| Display | iOS / Android Tablet |
| Multiple Viewers | Supports up to 4 separate WiFi devices that can all record photos and videos |
| Image / Video Capture | Touch screen GUI for video and photo capture |
| Storage Media | Internal device storage of your choice |
| Battery Life | 2 Hours |
| IP Rating | IP50 |
| Operators | 1-2 |
| Battery | Consumer-available, rechargeable 12V |
| Lighting | Joystick Digital Proportional Control |
Camera Specifications
|
Image Device |
1/2.8 Type "Exmor R" CMOS Sensor |
|
Effective Pixels |
Approx. 2.13 Megapixels |
| Lens (Typical Value) | f = 4.3mm (WIDE) to 129mm (TELE), F1.6 to F4.7 |
|
Digital Zoom |
12x (360x with optical zoom) |
| Zoom Movement Speed |
Optical WIDE - Optical TELE = 4.6 sec (Focus Tracking On), 3.2 sec (Focus Tracking Off) Optical WIDE - Digital TELE = 6.7 sec (29.97p/59.94p mode), 7.1 sec (25p/50p mode) Digital WIDE - Digital TELE = 2.2 sec (29.97p/59.95p mode), 2.7 sec (25p/50p mode) Focus Movement time (inf to Near) = 1.1 sec |
|
Horizontal Viewing Angle |
63.7°(wide end) to 2.3°(tele end) |
|
Minimum Working Distance |
10 mm (wide end) to 1200 mm (Tele end) |
|
Sync System |
Internal |
| Minimum illumination |
ICR OFF: 0.01 lx (1/30 sec, 50%, High Sensitivity mode On) ICR ON: 0.0015 lx (1/30 sec, 50%, High Sensitivity mode On) |
| Recommended illumination |
100 lx to 100,000 lx |
|
S/N Ratio |
50 dB (Weight On) |
|
Backlight compensation |
On/Off |
|
Electronic Shutter Speed |
1/1 s to 1/10,000 sec, 22 steps |
|
White Balance |
Auto, ATW, Indoor, Outdoor, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), One-push, Manual |
|
Gain |
Auto/Manual (0 dB to 50.0dB (0 to 28 steps)) Max. Gain Limit (10.7 dB to 50.0 dB (6 to 28 steps)) |
|
Wide Dynamic Range Mode |
On/Off |
| Noise Reduction | On/Off (level 5 to 1 / Off, 6 steps) |
| Defog Mode | On/Off |
|
Color Enhancement |
On/Off |
|
Aperture control |
16 steps |
|
Presets |
16 Positions |
|
Camera Control |
VISCA protocol (CMOS 5V), 9.6 kbps, 19.2 kbps, 38.4 kbps, 115.2 kbps, Stop bit, 1 bit |
|
Video Output |
HD: Digital Y/CB/CR 4:2:2 via LVDS (Signal format conforms to SMPTE 274/SMPTE 296.) Analog SD: CVBS |
|
Operating Temperature/Humidity |
-5 ℃ to +60 ℃ / 20% to 80%, Absolute humidity 36 g/m3 |
|
Storage Temperature/Humidity |
-20 ℃ to +60 ℃ / 20% to 95%, Absolute humidity 36 g/m3 |
|
Power Consumption |
3.2 W (zoom/focus inactive); 4.0 W (zoom/focus active) |
|
Power Requirements |
6.0 V to 12.0 V DC |
|
Dimensions |
50.0 x 60.0 x 89.7 mm |
|
Mass |
Approx. 255 g (9.0 oz) |